One of the directions that makes it possible to increase the efficiency of low-orbit satellite Internet in conditions of destructive influences is the use of OFDM systems that support the frequency hopping mode. It is obvious that the effectiveness of countering interference generated by electronic warfare (EW) is largely determined by the algorithm for selecting operating frequencies. In this paper, it is proposed to implement a block of SSF based on the SPN cipher "Grasshopper", which provides high resistance to the selection of the operating frequency by the SREB. However, in the event of failures and failures in the operation of such a unit, the transmitter and receiver operating in the microwave mode will not be able to establish information transmission. To solve this problem, the article proposes to use polynomial modular residue class codes (PMCCS). However, the analysis of the well-known error correction algorithms in PMCS has shown that they cannot be used to increase the reliability of the SPN-based CCF unit.

Keywords: Keywords: OFDM systems supporting frequency hopping, pseudorandom number generation methods, Grasshopper SPN cipher, polynomial modular residue class codes, error correction algorithm

This article provides a description of the developed hardware and software complex for controlling lamps using the DALI protocol, design features and software code, recommendations for operation.and development of new production on available floor spaces. The most important organizational economic targets of a diversification of management are presented by innovative activity of the industrial enterprise.

Keywords: DALI protocol, lighting device, lighting control, Arduino, luminous flux

The concept of digitalization of the construction organization project (POS) is presented, which is based on its close connection with the construction schedule. The place of the POS in the digital model of the building at the project stage (PIM) is considered. based on its digitalization, taking into account the relationship between information modeling at the project stage (PIM). The main problems that may arise when implementing the digital version of the POS in the general information model at the project stage are identified.

Keywords: BIM, TIM, POS, digital model, calendar schedule, construction organization

The work deals with the results of research on the influence of complex mineral additive: chemical water treatment sludge with burnt rock or fly ash or gaize. The rational content of chemical water treatment sludge in the complex additive was determined to be 50%. The relationship between compressive strength, flexural strength and W/C ratio, bettwen the flexural strength, E-modulus and the compressive strength were obtained. Complex mineral additive into fine grain concrete does not lead to a decrease in flexural strength and does not increase the E-modulus of fine grain concrete. The average range of the E-modulus of fine grain concrete with complex mineral additive practically coincide with those in Russian National Standart 56378 - 2015. The use of chemical water treatment sludge for fine grain concrete at amount of 20% of complex additive of a rateable composition instead of part of the cement provided to increasing of compressive strength at an equal W/C ratio relatively to the non-additive standard by 7 - 20%, and the flexural strength by 12 - 22% .

Keywords: miniral additive, tensile strength, modulus of elasticity, gaize, fly ash, burnt rock, chemical water treatment sludge

The article discusses the method of constructing a horizontal protective screen made of large-diameter steel pipes used for the construction of tunnel-type structures using a closed method. The factors influencing the choice of this method are analyzed - features of the construction site, economic and time indicators. As an example, a project for constructing a protective screen made of large-diameter pipes for the construction of a two-section transport tunnel under railway tracks is considered. Diagrams are provided that provide basic information about the construction project, its main parameters are considered: geometric shape and dimensions, location of structural elements with an indication of their sizes. The sequence of construction work is presented, consisting of six main stages, starting with the construction of auxiliary working pits and ending with the construction of the internal structures of the tunnel. Such construction of tunnels in dense urban areas requires taking into account and minimizing their impact on existing structures and transport routes in the construction area. The article presents the results of numerical calculations of stabilized movements of the soil mass, confirming the effectiveness of this method.

Keywords: horizontal protective screens, tunnel-type structures, large-diameter pipes, soil deformations

The problem of vulnerabilities in the Robot Operating System (ROS) operating system when implementing a multi-agent system based on the Turtlebot3 robot is considered. ROS provides powerful tools for communication and data exchange between various components of the system. However, when exchanging data between Turtlebot3 robots, vulnerabilities may arise that can be used by attackers for unauthorized access or attacks on the system. One of the possible vulnerabilities is the interception and substitution of data between robots. An attacker can intercept the data, change it and resend it, which can lead to unpredictable consequences. Another possible vulnerability is unauthorized access to the commands and control of Turtlebot3 robots, which can lead to loss of control over the system. To solve these vulnerabilities, methods of protection against possible security threats arising during the operation of these systems have been developed and presented.

Keywords: Robotic operating system (ROS), multi-agent system, system packages, encryption, SSL, TLS, authentication and authorization system, communication channel, access restriction, threat analysis, Turtlebot3

This paper examines the problems of optimizing the loading of client web applications and ways to solve them, taking into account various practical conditions. It provides ways to speed up the loading of web applications and remove blocking elements in the data processing chains in order to improve various aspects of the user experience. An approach is proposed that allows you to design an optimal application loading chain that meets the highest quality standards in the front end industry and provides the best user experience.

Keywords: front end, rendering, client web applications, load time, performance optimization, user experience

The article considers domestic, foreign and international experience in the application of information modeling technologies (IMT) and its standardization in the planning of integrated development and information modeling (IM) of territories. The analysis of the world practice of standardization of TIM application in planning of complex development and information modeling of territories has revealed the absence of unified approaches and system representation in the part of development of standards in the subject area. Based on the results of the analysis and generalization of world practice recommendations and proposals for the development and updating of national standards and codes of practice in terms of the application of IMT in the planning of integrated development and information modeling of territories are developed.

Keywords: information modeling, integrated development of territories, technical standards

This paper examines the need to use frameworks as such, as well as React, the most commonly used framework for creating the View portion of client-side web applications. Its design, the proposed approach to developing client applications, the problems it solves and creates, its strengths and weaknesses, as well as its features and limitations in application are studied.

Keywords: view frameworks, client web applications, front end, React, Reconciliation, Fiber, rendering

The prospects for building a satellite Internet based on a low-orbit constellation of satellites (LOСS) are due to the fact that only it allows for stable and reliable communications anywhere on the planet. Therefore, the technology of satellite industrial Internet of things IIoT has become widespread in the oil and gas industry, many of whose facilities are located in the Far North. However, when using satellite low-orbit Internet (SLOEI), new threats and attacks arise against it. Among attacks on LOCS, a special place is occupied by attempts to impose unauthorized content on SLOEI subscribers. This situation can be prevented using a satellite identification system. For the effective operation of the “friend or foe” challenge-response system for LOCS, a copy-resistant authentication protocol with zero knowledge disclosure was developed. This property was achieved by reducing authentication time through the use of modular deduction class codes (MDCC). The use of parallel VDCC codes has led to a change in the method of satellite identification, which entails a revision of the principles for constructing a request-response system. Therefore, the development of a block diagram of a satellite identification system operating in the MDCC for a low-orbit satellite Internet system is relevant.

Keywords: imitation resistance, zero-knowledge authentication protocol, modular codes of residue classes, block diagram of the low-orbit satellite identification system

The main architectural landmark of the city of Nalchik, the capital of the Kabardino-Balkarian Republic, is the building of the Sosruko complex, distinguished by its unusual architecture and built in the 70s of the 20th century. The authors of the article turned to the symbol of the city because it is 55 years old and is a unique architectural ensemble. Sosruko is a wonderful monument of brutalist architecture that is visible from every corner of the city. This is evidenced by well-deserved awards and prizes for the originality of the design. Thanks to such buildings, which influence the image of the city, the architecture of the native land will not be the same and faceless. In our time, talented builders and architects should raise issues of preserving architectural heritage, and also remember the best works of architects who have made an invaluable contribution to the development of the construction industry of the Republic of Kabardino-Balkaria.

Keywords: architecture, construction, Kizilovka, Nartiya, Sosruko, Nart epic, ensemble, chairlift route, mountain slope, loose soil rocks

Expert work has been carried out to determine the causes of the low adhesion strength of hand-molded ceramic bricks with Maxpol colored masonry mortar. The tests were carried out in accordance with GOST 24992 on 6 series of samples aged 7 and 28 days of hardening. The adhesion strength in the series of tested samples at 7 days of age, which were washed with running water, is 54% higher compared to the samples that were not treated.The compressive strength of Maxpol colored masonry mortar meets the requirements of technical specifications 23.64.10-001-79211444-2017 . The adhesion strength in the masonry meets the requirements of technical specifications only in a series of hand-molded bricks that have been treated with running water at the age of 28 days.

Keywords: ceramic brick, colored masonry mortar, adhesion strength, compressive strength, separation area

Technological pipelines of compressor stations are one of the significant types of basic equipment that ensures uninterrupted operation during gas transportation. In this article, we paid special attention to the issue of safe operation of the pipeline strapping of the gas treatment plant for transportation, which is designed to dry gas to the required parameters required by consumers and is one of the main technological units of the compressor station. During the operation of the adsorber lines with "hot" and "cold" gases, the pipelines of the regeneration line are subjected to high variable temperature loads. Thus, the operating organization faces the problem of ensuring sufficient compensation for the linear expansion of technological pipelines during their periodic heating. The calculation of the service life of the piping and its stability with a matched axial bellows compensator has been performed. Various solutions to the reliability problems of these compressor station components are considered and analyzed. It is concluded that it is necessary to update the regulatory design framework and introduce continuous technical monitoring methods into the operated facilities.

Keywords: gas treatment plant, process pipeline, adsorber, safe operation period, temperature load, compensator

The article presents the results of the effect of replacing a part of cement with volcanic ash on the strength of cement stone in building mortars. Pozzolan additives have hydraulic properties. Volcanic ash from Kabardino-Balkaria deposits can be used in building mortars and concrete mixtures as an active mineral additive.

Keywords: volcanic ash, active mineral additive of natural origin, building mortars with active mineral additives, cement stone, flexural and compressive strength

Reliable and safe operation of oil and gas pipelines in the conditions of the Far North and Siberia is an urgent task facing the Russian Federation. It has the most important economic and strategic importance. The climatic and geological conditions of these regions suggest a high degree of risk associated largely with seasonal temperature fluctuations and oil pumping technologies, leading to freezing or thawing of the soil, the appearance of thawed permafrost waters. The purpose of our study was to analyze the influence of extreme natural and operational conditions on the design and spatial position of pipelines during the operation of the section of the CPS-2 - NPS Urengoyskaya highway. It was found out that the studied section of the oil pipeline has a predisposition to failures due to unfavorable conditions: meltwater, heaving soils, swampy territory. Technological calculations allowed us to conclude that at this stage the pipeline route meets all the conditions of strength and stability, i.e. the reliability of the pipeline is ensured.

Keywords: hydrocarbons, pipeline, melt water, underground laying, strength calculation, stability calculation, permafrost soils, spatial location